Using External Audio/Video Players-Av-In - Kenwood DDX7017BT Instruction Manual

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Display the <Rear Camera> screen.
(Page 37)
2
Display the parking guidelines adjustment
screen.
3
Adjust the parking guidelines by selecting
the mark (1), then adjusting the
position of the selected
38
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize ] for 2 seconds
to set all the
position.
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 53.
❏ Starting playback
Preparation:
"AV-IN" cannot be selected when <iPod Setup>
is set to [USB+AV-IN]. Be sure to select other
connection method for <iPod Setup> beforehand.
(Page 23)
1
Connect an external component to the
iPod/AV-IN input terminal. (Page 71 )
mark (2).
2
Select "AV-IN" as the source. (Page 12)
3
Turn on the connected component and
start playing the source.
marks to the initial default
❏ Changing the AV-IN name
You can change the AV-IN name displayed on the
"AV-IN" source control screen.
1
Display the <VIDEO Mode> screen.
2
Select an AV-IN name.
• This setting does not affect the source name
displayed on the Home screen.