Kenwood DDX7017BT Instruction Manual page 67

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals for DDX4017BT/DDX417BT/DDX417BTM
10 A fuse
See page 71.
See page 71.
1
White ª / White with black stripe · : To front speaker (left)
Gray ª / Gray with black stripe · : To front speaker (right)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Light blue with yellow stripe (Steering remote control wire)
Brown (Mute control wire)
Blue with white stripe (Power control wire/Antenna control wire) (12 V
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
FRONT VIEW CAMERA
Purple with white stripe (Reverse sensor wire)
See page 72.
Light green (Parking sensor wire)
350 mA)
USB terminal (1.0 m): See page 70.
See page 71.
Connect the antenna cord
to the antenna terminal.
See page 71.
*
To the remote adapter (not supplied) which is compatible with your car.
Not used.
To the power control terminal when using the optional power amplifier.
(Or)
To the control terminal of the motor antenna or to the power terminal for the
booster amplifier of film-type antenna.
To car light control switch.
* If no connections are made, do not let the cable come out from the
tab.
Connect to the vehicle's reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle's
3
parking brake detection switch
harness.
• For best safety, be sure to
connect the parking sensor.
Ignition key switch
Fuse box
To car chassis Battery
ENGLISH 67