External Audio/Video Players-Av-In - Kenwood DDX9017DABS Instruction Manual

Guidelines SETUP
■
If you select [ON] for [Parking Guidelines],
adjust the parking guidelines. See To adjust
the parking guidelines (P.55).
Dashboard Camera /Front Camera
■
( )
Dashboard Camera: Select this when the
dashboard camera is connected.
CMOS 3-Series Camera: Select this when
the CMOS-3xx series with ID 2 set is
connected.
Other: Select this when the other camera is
connected.
OFF (Default): Select this when no camera is
connected.
F-CAM Settings (
■
If you select [CMOS 3-Series Camera] for
[Dashboard Camera /Front Camera],
adjusts the CMOS-3xx series with ID 2 set. For
details, see the instruction manual of your
camera.
Front Camera Mirror Image (
■
If you select [ON] for [Dashboard Camera /
Front Camera].
ON: Displays the picture from the front view
camera horizontally reversed.
OFF (Default): Displays the picture from the
front view camera as it is.
Dashboard Camera (
■
ON: Select this when the dashboard camera
is connected.
OFF (Default): Select this when no camera is
connected.
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.
1
Touch [ON] of [Parking Guidelines] in the
Camera screen. (P.54)
2
Touch [Guidelines SETUP] in the Camera
screen.
)
)
)
Other External Components
3
Adjust the parking guidelines by
selecting the mark.
4
Adjusting the position of the selected
mark.
C
Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
NOTE
• Touch [Initialize] and after touch [Yes] to set all
the marks to the initial default position.
External audio/video players—
AV-IN
1
Connect an external component to the
AV-IN input terminal. (P.83)
2
Select [AV-IN] as the source. (P.13)
3
Turn on the connected component and
start playing the source.
A
D
B
English
55