Kenwood DDX7017BT Instruction Manual page 68

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
❏ Connecting wires to terminals for DDX7017BT/DDX7017BTM
10 A fuse
See page 71.
See page 71.
See page 71.
See page 72.
1
White ª / White with black stripe · : To front/mid range speaker (left)*
Gray ª / Gray with black stripe · : To front/mid range speaker (right)*
Green ª / Green with black stripe · : To rear/tweeter speaker (left)*
Purple ª / Purple with black stripe · : To rear/tweeter speaker (right)*
Light blue with yellow stripe (Steering remote control wire)
Brown (Mute control wire)
Blue with white stripe (Power control wire/Antenna control wire) (12 V
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
68
See page 71.
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
USB terminal (1.0 m): See page 70.
See page 71.
FRONT VIEW CAMERA
See page 71.
REAR VIEW CAMERA
See page 71.
VIDEO OUT
1
1
1
1
*
350 mA)
Connect the antenna cord to the antenna terminal.
* 1
2
*
2
To the remote adapter (not supplied) which is compatible with your car.
Not used.
To the power control terminal when using the optional power amplifier.
(Or)
To the control terminal of the motor antenna or to the power terminal for the
booster amplifier of film-type antenna.
To car light control switch.
To car chassis
Connect to the vehicle's reverse lamp harness
when using the optional rear view camera.
Connect to the vehicle's
3
parking brake detection
switch harness.
• For best safety, be sure
to connect the parking
sensor.
For 3 way speaker system connection, see also page 72.
If no connections are made, do not let the cable come out from the
tab.
Ignition key switch
Fuse box
Battery