Advertisement
Quick Links
Tower Kit is available for Jacto Arbus 500 and Arbus 200 airblast sprayers.
Follow instructions below for assembly:
ATTENTION!
With sprayer hitched to the tractor, park on a firm and level
ground free of obstacles. Apply the tractor parking brake.
Wash the machine before assembling Tower Kit.
1- Locate left and right deflectors on
the rear of the machine (A).
2- Loosen
mounting
remove both right and left deflectors.
For more information, consult Technical Assistance
Toll free: 1-800-522-8610
E-mail: info@jacto.com
Home page: www.jacto.com
ARBUS 500 / ARBUS 200
TOWER KIT
bolts (B) and
1
A
B
B
IMP-????
Advertisement
Related Manuals for Jacto ARBUS 500
Summary of Contents for Jacto ARBUS 500
- Page 1 ARBUS 500 / ARBUS 200 TOWER KIT IMP-???? Tower Kit is available for Jacto Arbus 500 and Arbus 200 airblast sprayers. Follow instructions below for assembly: ATTENTION! With sprayer hitched to the tractor, park on a firm and level ground free of obstacles. Apply the tractor parking brake.
- Page 2 3- Pull the clip and remove the quick fitting clamp (C). Then, disconnect the hose from left and right branches. branch hose 4- Loosen nozzle branch mounting bolts (D) and remove both right and left branches. 5- Use a screwdriver (E) to loosen the hose clamp and disconnect the branch hose.
- Page 3 6- To remove the fan guard screen, loosen the mounting bolt for the spacer bushing (F) and remove the deflector upper fastener (G). Next, tighten the mounting bolt (F) for the spacer bushing. 7- Loosen and remove mounting bolts for spacer bushings (H). 8- Remove spacer bushings (I) and guard screens from both left and right sides.
- Page 4 9- Equipment without spacer bushin- gs and guard screen ready for Tower Kit installation. > Tower Kit assembly 1- Connect the branch hose to the Tower Kit (J) and tighten the clamp with a screwdriver (L). Tower Kit 2- Tower Kit with branch hose con- nected.
- Page 5 3- The items shown are included with the Tower Kit and are used in the assembly. 4- Remove nozzle holders from left and right branches. nozzle holder 5- Install the nozzle holders with seal (1) on the Tower Kit nozzle branch (2 and 3).
- Page 6 6- Use the spacer bushings included in the kit and install on the Tower Kit as shown in the picture. 7- Install the Tower Kit to the fan hou- sing. Align the spacer bushings with the holes on the fan housing.
- Page 7 8- With Tower Kit installed, insert mounting bolts into spacer bushings (M) and tighten. 9- With both sides of Tower Kit instal- led, locate the two mounting holes (N and O). Insert mounting bolts and tighten.
- Page 8 10- Connect the branch hose to the quick fitting (right and left sides) and attach the quick fitting clamp (P). 11- Machine with Tower Kit installed. Arbus 500 Arbus 200...