Reporting And Monitoring Installation Data - SolarEdge RESU10H Prime Series Installation Manual

Maximum Self Consumption (MSC) - Set the system to maximize self-
consumption, and then the level of stored energy to be reserved for backup.

Reporting and Monitoring Installation Data

Monitoring the site requires connecting the inverter to the monitoring platform, using
any of the wired or wireless options available from SolarEdge. Refer to Setting Up
Communication with the Monitoring Platform on page 60.
The Monitoring Platform
The monitoring platform provides enhanced PV performance monitoring and inverter
yield assurance through immediate fault detection and alerts at the panel, PV array and
system level.
Using the platform, you can:
View the latest performance of specific components.
Find under-performing components, such as panels, by comparing their
performance to that of other components of the same type.
Pinpoint the location of alerted components using the physical layout.
The monitoring platform enables accessing site information, including up-to-date
information viewed in a physical or logical view:
Logical Layout: Shows a schematic tree-layout of the components in the system,
such as: inverters, Power Optimizers, PV arrays, panels, meters and sensors, as well
as their electrical connectivity. This view enables you to see which panels are
connected in each PV array, which PV arrays are connected to each inverter, and so
on.
Physical Layout: Provides a bird's eye view of the actual placement of panels in the
site, and allows pinpoint issues to the exact location of each panel on a virtual site
map.
If you do not report the mapping of the installed Power Optimizers, the monitoring
platform will show the logical layout, indicating which Power Optimizers are connected
to which inverter, but will not show PV strings or the physical location of Power
Optimizers.
The monitoring platform includes a built-in help system that guides you
through the monitoring functionality.
For more information, refer to
monitoring#/.
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00842-1.3
Chapter 6: Activating, Commissioning and Configuring the System
https://www.solaredge.com/products/pv-
57