SolarEdge RESU10H Prime Series Installation Manual page 32

LEDs: three LEDs indicate, by color and state (on/ off/ blinking
(2)
flickering /alternating
performance indications. For more information, refer to
https://www.solaredge.com/leds.
The main LED indications are:
Blue ON - the inverter is communicating with the monitoring
platform
Green ON - the system is producing
Green blinking - AC is connected but the system is not producing
Red ON - system error
The following table describes system performance information by LED color and
ON/OFF/P switch position.
(1) Blinking = Turns ON and OFF for the same duration
(2) Flickering = Turns ON for 100 mS and turns OFF for 5 seconds
(3) Alternating = alternate LED flashes
Single Phase Energy Hub Inverter with Prism Technology MAN-01-00842-1.3
(3)
), different system information, such as errors or
Figure 7: LEDs
Chapter 3: Installing the Inverter
(1)
/
31