Table of Contents
Advertisement
Step 3. Mount the CD-ROM drive by using the System Administration Manager (SAM).
•
Run SAM using the following command:
$ sam
NOTE
•
Select
Disk and File System
•
Select
Disk Devices
•
Select the CD-ROM drive that contains your software media
•
Select
Mount
•
Specify the mount directory and deselect the
Step 4. Run the swinstall program using the following command:
$ /usr/sbin/swinstall
This opens the Software Selection window.
Step 5. Change the Source Depot Type and Source Host Name, if necessary, and enter the software location
in the Source Depot Path field. If installing from CD-ROM, the software location is the mount
directory. Select the
Step 6. The Software Selection window now contains a list of available software to install.
Step 7. Highlight the Smart Array 6404 software, for example:
RAID-01 B.11.23.02
Choose
Mark for Install
Step 8. From the Actions menu, select the Install... menu. This begins product installation and opens the
Install Analysis window.
Step 9. Click
in the Install Analysis window when the Status field displays a Ready message.
OK
Step 10. Click
in the Confirmation window to start software installation.
YES
When the processing is finished, the Status field displays a Ready message. Select Done. The
Note window opens.
Step 11. Click
in the Note window to reboot. The user interface disappears and the system reboots.
OK
When the system comes back up, log on to the system as root and view the
/var/adm/sw/swagent.log and /var/adm/sw/swinstall.log files to view error or warning
messages that may have occurred during the installation.
Step 12. Verify that all installed Smart Array 6404 controllers have a software state of
the ioscan -fnC ext_bus |grep ciss command.
Chapter 1
System Administration Manager (SAM) is deprecated in HP-UX 11i v3, and
replaced by System Management Homepage (SMH). When you start SAM, the
SMH command is automatically called. For more information, see the smh(1M)
man page.
from the Actions Menu
button to return to the Software Selection window.
OK
RAID SA; Supptd HW=A7143A/A9890A/A9891A
from the Actions menu; this chooses the highlighted software.
Smart Array 6404 Controller HP-UX Installation
Smart Array 6404 HP-UX Software Installation
option
At Every System Boot
, by running
CLAIMED
11
Advertisement
Table of Contents
