Download Print this page

Linear Technology LTC2195 Manual

16-bit, 25msps to 125msps dual adcs
Hide thumbs Also See for LTC2195:

Advertisement

Quick Links

DESCRIPTION
Demonstration circuit 1763A supports a family of 16-Bit
25Msps to 125Msps ADCs. Each assembly features one
of the following devices: LTC
LTC2192, LTC2191, LTC2190 high speed, dual ADCs.
The versions of the 1763A demo board are listed in Table 1.
Depending on the required resolution and sample rate,
the DC1763A is supplied with the appropriate ADC. The
Table 1. DC1763A Variants
DC1763A VARIANTS
1763A-A
1763A-B
1763A-C
1763A-D
1763A-E
1763A-F
PERFORMANCE SUMMARY
PARAMETER
Supply Voltage – DC1763A
Analog Input Range
Logic Input Voltages
Logic Output Voltages (Differential)
Sampling Frequency (Convert Clock Frequency)
Encode Clock Level
Resolution
Input Frequency Range
SFDR
SNR
Arrow.com.
Downloaded from
16-Bit, 25Msps to 125Msps Dual ADCs
®
2195, LTC2194, LTC2193,
ADC PART NUMBER
RESOLUTION
LTC2195
LTC2194
LTC2193
LTC2192
LTC2191
LTC2190
(T
= 25°C)
A
CONDITIONS
Depending on Sampling Rate and the A/D Converter
Provided, this Supply Must Provide up to 500mA.
Depending on SENSE Pin Voltage
Minimum Logic High
Maximum Logic Low
Nominal Logic Levels (100Ω Load, 3.5mA Mode)
Common Mode
Minimum Logic Levels (100Ω Load, 3.5mA Mode)
Common Mode
See Table 1
Single-Ended Encode Mode (ENC
Differential Encode Mode (ENC
See Table 1
See Table 1
See Applicable Data Sheet
See Applicable Data Sheet
DEMO MANUAL DC1763A
LTC2195, LTC2194, LTC2193,
LTC2192, LTC2191, LTC2190
circuitry on the analog inputs is optimized for analog input
frequencies from 5MHz to 140MHz. Refer to the data sheet
for proper input networks for different input frequencies.
Design files for this circuit board are available at
http://www.linear.com/demo
L, LT, LTC, LTM, μModule, Linear Technology and the Linear logo are registered trademarks
and PScope is a trademark of Linear Technology Corporation. All other trademarks are the
property of their respective owners.
MAXIMUM SAMPLE RATE
16-Bit
125Msps
16-Bit
105Msps
16-Bit
80Msps
16-Bit
65Msps
16-Bit
40Msps
16-Bit
25Msps
Tied to GND)
Not Tied to GND)
INPUT FREQUENCY
5MHz to 140MHz
5MHz to 140MHz
5MHz to 140MHz
5MHz to 140MHz
5MHz to 140MHz
5MHz to 140MHz
MIN
TYP
MAX
UNITS
3
3.6
6
1
2
1.3
0.6
350
1.25
247
1.25
0
3.6
0.2
3.6
dc1763af
1
V
V
P-P
V
V
mV
V
mV
V
V
V

Advertisement

loading
Need help?

Need help?

Do you have a question about the LTC2195 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Linear Technology LTC2195

  • Page 1 Depending on the required resolution and sample rate, L, LT, LTC, LTM, μModule, Linear Technology and the Linear logo are registered trademarks and PScope is a trademark of Linear Technology Corporation. All other trademarks are the the DC1763A is supplied with the appropriate ADC. The property of their respective owners.
  • Page 2: Quick Start Procedure

    QUICK START PROCEDURE Demonstration circuit 1763A is easy to set up to evaluate Optional Jumpers: the performance of the LTC2195 A/D converter family. Refer J8 Term: Enables/Disables optional output termination. to Figure 1 for proper measurement equipment setup and (default: removed) follow the procedure below: J5 ILVDS: Selects either 1.75mA or 3.5mA of output...
  • Page 3 For input frequen- reducing the wideband noise power of the signals. In cies above 140MHz, refer to the LTC2195 data sheet for a the case of the DC1763A a band pass filter used for the proper input network.
  • Page 4 Serial Programming PScope has the ability to program the DC1763A board serially through the DC1371. There are several options available in the LTC2195 family that are only available through serially programming. PScope allows all of these features to be tested.
  • Page 5 DEMO MANUAL DC1763A QUICK START PROCEDURE Channel 1 Nap: Selects between normal operation and Internal Termination: Enables LVDS internal termination putting channel 1 in nap mode. • Off (Default): Disables internal termination • Off (Default): Channel one is active • On: Enables internal termination •...
  • Page 6: Parts List

    DEMO MANUAL DC1763A PARTS LIST ITEM REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER Required Circuit Components Capacitor, Array, 0508, 2.2μF , 20%, 4V, X5R AVX, W2L14D225MAT1A C2, C3, C5, C7, C8, C9, C15, C16, C18, Capacitor, X5R, 0.1μF , 10V, 10%, 0402 AVX, 0402ZD104KAT2A C28, C36, C48, C52 Capacitor, X5R, 1μF , 10V, 10%, 0402...
  • Page 7 Transformer, RF~SMT~1:1 Balun Macom, MABA-007159-000000 T8, T10 Transformer, Flux-Coupled Balun Macom, MABAES0060 IC, LT1763CS8-1.8 SO8 Linear Technology, LT1763CS8-1.8#PBF IC, EEPROM 32KBIT 400khz 8TSSOP Microchip, 24LC32A-I/ST XJ2, XJ5, XJ8, XJ13, XJ14, XJ15 Shunt, 0.079" Center Samtec, 2SN-BK-G Stencil (Top & Bottom)
  • Page 8: Schematic Diagram

    DEMO MANUAL DC1763A SCHEMATIC DIAGRAM dc1763af Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from...
  • Page 9 Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa- tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
  • Page 10 Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety measures typically found in finished commercial goods.

This manual is also suitable for:

Ltc2194Ltc2193Ltc2192Ltc2191Ltc2190