Installation Identifier (E0H; Operation Mode Register 2 (Feh) - Elatec TWN3 Multi ISO Technical Manual

Byte value Corresponding transponder type
00 Mifare® Mini
01 Mifare® Classic 1K
02 Mifare® Classic 4K
03 Mifare® Plus S
04 Mifare® Plus X
05 Mifare® Ultralight / Ultralight C
06 Mifare® DESFire
0F Unknown ISO14443A transponder
10 I•Code SL2
11 I•Code SL2-S
12 Tag-it™ HF-I Plus Inlay
13 Tag-it™ HF-I Plus Chip
14 Tag-it™ HF-I Standard
15 Tag-it™ HF-I Pro
1F Unknown ISO15693 transponder
30 Picopass / ICLASS transponder
40 SRX transponder
80 ISO14443B transponder
FF Unknown transponder
5.12 Installation Identifier (E0h ... EFh)
The Installation Identifier is used for Mifare® PLUS in virtual card environment. The Installation
Identifier must match with the one stored in the Mifare® PLUS transponder that shall be identified
using Virtual Card Select command.

5.13 Operation Mode Register 2 (FEh)

The Operation Mode register 2 defines which tag types the reader shall support. Including or excluding
transponder types has direct influence in the transponder detection speed of the reader.
Operation Mode Register 2
Bit 7 Bit 6
Elatec GmbH
Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Page 17 of 65