Ford f-250/f-350/f-450 (single and dual rear wheel) 4-wheel drive (28 pages)
Summary of Contents for Air Lift AirCELL 52205
Page 1
Kit 52205 Dodge 1500 Pickup 2 & 4WD rear application INSTALLATION GUIDE For maximum effectiveness and safety, please read these instructions completely before proceeding with installation. Failure to read these instructions can result in an incorrect installation.
Air Lift Company reserves the right to make changes and improvements to its products and publications at any time. For the latest version of this manual, contact Air Lift Company at (800) 248-0892 or visit our website at www.airliftcompany.com.
10911 Spring Cup ..........2 13244 Cup Spacer (optional) ......2 03710 Upper Bracket ........2 10936 Nutsert Tool w/ Nutsert .......1 18585 Nutsert ..........1 Missing or damaged parts? Call Air Lift customer STOP! service at (800) 248-0892 for a replacement part. MN-738...
AirCell Installing the AirCell System ASSEMBLING AND ATTACHING THE SYSTEM 1. Jack up the rear of the vehicle or raise on a hoist. Support the frame with safety stands. Lower the axle of the vehicle until the suspension is fully extended. 2.
Page 7
AirCell 5. Attach the upper bracket (G)/spring cup (E) to the stock jounce bumper cup (with the new nutsert [I] installed) using a 3/8-16X3” bolt (B), 3/8 lock washer (C) and 3/8 flat washer (D). (fig. 1) NOTE The spring cup (E) has a slot in it, position the cup so the cup offsets to the rear of the vehicle.
Air Lift at (800) 248-0892 in the U.S. and Canada (elsewhere, (517) 322-2144) for a Returned Materials Authorization (RMA) number. Returns to Air Lift can be sent to: Air Lift Company • 2727 Snow Road • Lansing, MI • 48917.
Page 12
Thank you for purchasing Air Lift products — the professional installer’s choice! Air Lift Company • 2727 Snow Road • Lansing, MI 48917 or PO Box 80167 • Lansing, MI 48908-0167 Toll Free (800) 248-0892 • Local (517) 322-2144 • Fax (517) 322-0240 • www.airliftcompany.com...
Need help?
Do you have a question about the AirCELL 52205 and is the answer not in the manual?
Questions and answers