Advertisement
Step 10
SX23 ctr
(12)
The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measur-
ing from the ends of angles place
2 studs between each corner and
splice post on the sides and 1 on the
rear of building. Position stud inside
top angle and fasten with a screw at
the lower hole.
STEP
3
9365
Studs/Front Channel
(4)
9365
Parts Needed For
STEP
1
23
9344 Siding Stud (10)
9365 Front Wall Channel (2)
2
Rest bottom tab (large hole)
outside oor frame. Do not fasten
tab at this time. Repeat procedure
for the remaining studs around the
building.
3
Fasten front wall channel into
position behind corner post and door
jamb. Fasten using three screws.
FASTEN STUD AT
LOWER HOLE
DO NOT FASTEN TAB
AT THIS TIME
LARGE HOLE
STEP
2
Advertisement
