I-5. Wps Setup; I-6. Wps Button With Wireless Scheduling - Edimax EW-7478AC User Manual

I-5. WPS Setup

If your wireless router/access point supports WPS (Wi-Fi Protected Setup)
then you can use this method to setup your wireless extender.
1.
Press the WPS button on your wireless
router/access point to activate its WPS.
Please check the instructions for your
wireless router/access point for how
long you need to hold down its WPS
button.
2.
Within two minutes, press and hold the
WPS button on the wireless extender for
two seconds. The extender's
LED should flash to indicate that WPS is in
progress.
3.
The devices will establish a connection. The extender's
should display on for 30 seconds to indicate a successful connection.

I-6. WPS Button with Wireless Scheduling

When wireless scheduling is in operation so that one Wi-Fi frequency is active
and one Wi-Fi frequency is off, the WPS button's primary function is to
activate the Wi-Fi frequency that is off.
E.g. when 2.4GHz Wi-Fi is active and 5GHz Wi-Fi is off, press the WPS button
once to activate/wake the 5GHz network.
Following this, the WPS button functions normally as described above in WPS
Setup and can be pressed to activate WPS.
green WPS
green WPS LED