Table of Contents
Advertisement
III-3-2. Setup Wizard
help you switch the device to a different operating mode. Select "Setup
Wizard" or "Switch to Router/Access Point/Range Extender/Wireless
Bridge/WISP mode" and then click "Run Wizard" to begin.
Switch to Access Point/
Wi-Fi Extender/ Wi-Fi
Bridge mode
Switch to Access Point/ Wi-Fi Extender/ Wi-Fi Bridge mode:
1.
Follow the on-screen instructions to back up your current settings and
then reset the device back to its factory default settings.
2.
After the device has reset you will see the screen below. Close your
browser and open it again.
3.
Follow the on-screen wizard to setup your device in a different mode.
Refer to II. Installation Step 3 onwards for help if needed.
You can run the setup wizard again to reconfigure the
basic settings of the device, or you can run a wizard to
This wizard will help you to switch the device
to a different operating mode: Access Point
mode, Wi-Fi extender mode, Wi-Fi bridge
mode (see below).
Advertisement
Table of Contents
