Page 1
Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-7822, H-9129 1-800-295-5510 uline.com SLED BASE CHAIR WITH ARMRESTS TOOL NEEDED Allen Wrench (included) PARTS Hardware Kit Back Cushion x 1 Seat Cushion x 1 Screw x 2 Screw x 4 5/16 x 1"...
Page 2
ASSEMBLY CONTINUED 2. Align back cushion with mounting holes. Use one Figure 2 5/16 x 1" screw (5) in top hole and one 5/16 x 1⁄" screw (6) in bottom hole to loosely secure. Repeat on opposite side. (See Figure 2) NOTE: Use Allen wrench to tighten all screws.
H-7822, H-9129 800-295-5510 uline.mx SILLA CON ARMAZÓN TIPO TRINEO CON DESCANSABRAZOS HERRAMIENTA NECESARIA Llave Allen (incluida) PARTES Kit de Tornillería 2 Tornillos 1 Respaldo Acojinado 1 Asiento Acojinado 4 Tornillos 5/16 x 1" 5/16 x 7/8" 2 Patas con 2 Tornillos...
Page 4
CONTINUACIÓN DEL ENSAMBLE 2. Alinee el respaldo acojinado con los orificios de Diagrama 2 instalación. Utilice un tornillo de 5/16 x 1" (5) en el orificio superior y uno de 5/16 x 1¼" (6) en el inferior para asegurarlos sin apretar. Repita en el lado opuesto.
H-7822, H-9129 1-800-295-5510 uline.ca CHAISE À BASE TRAÎNEAU EN VINYLE AVEC ACCOUDOIRS OUTIL REQUIS Clé Allen (inclus) PIÈCES Matériel d'installation Coussin de dossier x 1 Coussin de siège x 1 Vis x 2 Vis x 4 5/16 x 1 po...
Page 6
MONTAGE SUITE 2. Alignez le dossier sur les trous de fixation. Utilisez une Figure 2 vis de 5/16 x 1 po (5) dans le trou supérieur et une vis de 5/16 x 1 ¼ po (6) dans le trou inférieur et fixez sans serrer.