Table of Contents
Advertisement
Instructions for Use
WARNING! Always remove the plug from the power socket before fitting
or removing accessories.
Assembling the vacuum cleaner
1.
Insert the hose end into the hose inlet until it clicks into position.
2.
Insert the telescopic tube into the combination floor tool.
3.
Fit the other end of the telescopic tube to the handle.
4.
To rewind the power cable, press the cable rewind button with one hand and guide the
cable with the other hand to ensure that it does not whip causing damage to the cable.
Never extend the power cord further than the yellow mark.
5.
Press the On/Off button to switch the vacuum on.
6.
Rotate the speed control dial to adjust the suction of the vacuum.
7.
Advertisement
Table of Contents
