Smart R1 Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction manual so that you may take best advantage of them.
Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner hence will void the manufacturer’s warranty if used inappropriately.
Safety Precautions & Warnings IMPORTANT! Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label.
Page 6
Safety Precautions & Warnings (continued) 13. Do not use the appliance to pick up 22. Before carrying out any maintenance service flammable items or combustible liquids or cleaning the filters, always switch off the (i.e. petrol, hot ashes, cigarettes, matches, vacuum cleaner and disconnect the plug from explosive materials or anything burning) or use power supply.
Instructions for Use WARNING! Always remove the plug from the power socket before fitting or removing accessories. Assembling the vacuum cleaner Insert the hose end into the hose inlet until it clicks into position. Insert the telescopic tube into the combination floor tool. Fit the other end of the telescopic tube to the handle.
Maintenance WARNING! Ensure the cleaner is not connected to the mains powers supply when performing any maintenance duties. The cleaner should be switched off and disconnected from the mains supply. Never operate without filters as damage to cleaner could occur. Empty the dust tank after every use, failing to do so may clog the filters and cause poor suction.
Page 9
Rinse with warm water and allow to dry or wipe with cloth. Reinsert filter back into dust bin, turn clockwise to lock, then close the base flap. Reinsert the dust bin back into the appliance. A ‘click’ will be made when the bin is properly secured.
Maintenance (continued) Replacing the exhaust air filter Squeeze the dust bin release buttons. Lift lid and remove dust bin. Remove and replace the filter. Return dust bin and close front cover.
Troubleshooting Problems and Solutions Please contact Godfreys customer support and service hotline Australia on 1800 815 270 or New Zealand on 0800 282 288 to find your local spare parts provider. Fault Cause Solution Motor does not start or stops. No power supply.
Page 12
Bagless Vacuum Cleaner with HEPA Filtration Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a one year Electrical Home-Aids Pty. Limited is unable to accept responsibility parts and labour warranty against product defects and failures...
Need help?
Do you have a question about the smart R1 and is the answer not in the manual?
Questions and answers