ABB ACS880 Electrical Planning Manual page 44

44 Standards and markings
2
4
1 Medium voltage network
2 Neighboring network
3 Point of measurement
4 Low voltage
5 Equipment (victim)
6 Equipment
7 Supply transformer
8 Static screen
9 Drive
2. An EMC plan for preventing disturbances is drawn up for the installation. A template is
available in Technical guide No. 3 EMC compliant installation and configuration for a
power drive system (3AFE61348280 (English)).
3. The motor and control cables are selected, and routed according to the electrical planning
guidelines of the drive. The EMC recommendations are obeyed.
4. The drive is installed according to its installation instructions. The EMC recommendations
are obeyed.
WARNING!
A drive of category C4 is not intended to be used on a low-voltage public network
which supplies domestic premises. Radio frequency interference is expected if
the drive is used on such a network.
1
3
5
6
7
8
4
9
6