Remote Ctrl; Hdmi Resolution - Sony a7s II How To Use Manual

How to select how the time code is recorded (TC Make)
1. MENU →
of the control wheel.
Preset:
Records the newly set time code on the recording medium.
Regenerate:
Reads the last time code for the previous recording from the recording medium and records
the new time code consecutively from the last time code. The time code advances in [Rec
Run] mode regardless of the [TC Run] setting.
[214] How to Use

Remote Ctrl

You can shoot images using the RMT-DSLR1 or RMT-DSLR2 remote commanders (sold
separately). Refer also to the operating instructions for the remote commander.
1. MENU →
Menu item details
On:
Allows remote commander operation.
Off:
Does not allow remote commander operation.
Note
The RMT-DSLR1 remote commander cannot be used for movie recording.
The lens or lens hood may block the remote sensor that receive the signals. Use the
remote commander in the position from which the signal can reach the product.
When [Remote Ctrl] is set to [On], the product does not switch to power save mode. Set
[Remote Ctrl] to [Off] after using a remote commander.
[215] How to Use

HDMI Resolution

(Setup) → [TC/UB Settings] → [TC Make], then press
Changing settings
(Setup) → [Remote Ctrl] → desired setting.
Changing settings
Setup menu
Setup menu
in the center