Attaching A Lens - Sony a7s II How To Use Manual

computers or AV devices that are not compatible with exFAT when connected using a
micro USB cable. Make sure that the device is compatible with exFAT before connecting
it to the camera. If you connect your camera to an incompatible device, you may be
prompted to format the card. Never format the card in response to this prompt, as doing
so will erase all data on the card. (exFAT is the file system used on SDXC memory
cards.)
[22] How to Use

Attaching a lens

Set the power switch of the camera to off before attaching the lens.
1. Remove the body cap (A) from the camera and the rear lens cap (B) from the rear of
the lens.
When changing the lens, work quickly in a dust-free location to keep dust or debris
from getting inside the camera.
When shooting, remove the front lens cap from the front of the lens.
2. Mount the lens by aligning the two white index marks (mounting indexes) on the lens
and camera.
Preparing the camera Attaching a lens