Flash Mode - Sony a7s II How To Use Manual

2. Press the shutter button fully down.
Note
You cannot use the flash when recording movies.
While charging the flash,
light up.
Before attaching/removing an accessory such as a flash to/from the Multi Interface Shoe,
turn off the product first.
When attaching an accessory, insert it fully to the Multi Interface Shoe and screw tightly.
Also, make sure that the accessory is fixed securely to the product.
Do not use a commercially available flash with high-voltage synchro terminals or with
reverse polarity.
When shooting with the flash and the zoom is set to W, the shadow of the lens may
appear on the screen, depending on the shooting conditions. If this happens, shoot away
from the subject or set the zoom to T and shoot with the flash again.
The corners of a recorded image may be shaded, depending on the lens.
[54] How to Use

Flash Mode

You can set the flash mode.
1. MENU →
Menu item details
Flash Off:
flashes. After charging is completed, the flashing icon will
Using shooting functions
(Camera Settings) → [Flash Mode] → desired setting.
Using the flash