Related Manuals for Becker IP-BKR2
Summary of Contents for Becker IP-BKR2
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 IP-BKR2 & AUX QUICK START INSTALLATION GUIDE FOR BECKER AUX READY RADIOS...
-
Page 2: Installation
A special adapter is necessary to connect these devices to the car radio and usually requires sacrificing the CD changer. The iP-BKR2 updates select Becker AUX Ready radios to support new audio devices without sacrificing the look and feel of the dashboard components. - Page 3 Enabling AUX mode Radio connectors One of the most important steps in this process is enabling the Becker radio AUX menu option. Most Becker radios are pre-programmed to recognize a CD Warning: BLUE and GREEN plugs are for optional CD changer and if Changer connection and because of that you must perform the following steps present, both must be disconnected.
- Page 4 Press “CD” button to enter AUX mode Turn radio "ON" Radios with 3 Function buttons (i.e. BE4527) 2. Press and hold "TP" button for about 8 seconds until Becker 1 is displayed. 3. Turn tuning knob until AUX OFF is displayed.
- Page 5 Press CD button repeatedly until “AUX” is displayed press right control knob to select “ON” Setting is store automatically Cascade Pro (i.e., BE7941) Becker DTM /High speed (i.e., BE-7892, BE7910) To activate the External Device mode Press Sound button for more than 2 seconds Turn radio ON.
-
Page 6: Operation
Apple built-in controls and display to Adjust playback level using radio volume control operate the device. The volume button on the Becker radio is used to set If successful go ahead and reinstall radio the playback level.