Advertisement
Radio connectors
Warning: BLUE and GREEN plugs are for optional CD changer and if
present, both must be disconnected. YELLOW plug is reserved for
amplifier and if present must remain connected
If installing our Becker AUX adapter
1.
plug to chamber (C-3) on radio.
If installing our Becker iPod adapter:
2.
Connect BLUE plug to C-3 chamber and GREEN to C-2 chamber (See
Fig. 3)
Warning: Auxiliary input adapters do not include a GREEN plug however;
if the Becker radio has a CD changer connection, both the GREEN AND
BLUE plugs must be disconnected, If GREEN plug remains connected,
AUX adapter will not work as described
3. Carefully route adapters terminal (30-pin dock or 3.5mm) (See Fig. 4)
to glove box, center dash or location where the audio device will reside.
Fig. 3
: Simply connect BLUE
Apple 30-pin dock connector 3.5mm (1/8") Audio plug
Fig. 4
Enabling AUX mode
One of the most important steps in this process is enabling the Becker radio
AUX menu option. Most Becker radios are pre-programmed to recognize a CD
Changer connection and because of that you must perform the following steps
and change the setting to "AUX" otherwise the radio will not recognize the newly
installed adapter. See radio listing below to determine AUX enabling steps.
Advertisement
