Table of Contents
Advertisement
5.7.3
UPI Configuration
UPI General Configuration
UPI Status
This item displays information about the UPI status.
Link Speed Mode [Fast]
This item allows you to select the UPI link speed as either the fast mode or slow mode.
Configuration options: [Slow] [Fast]
Link Frequency Select [Auto]
This item allows for selecting the UPI link frequency.
Configuration options: [Auto] [9.6 GB/s] [10.4 GB/s] [Use Per Link Setting]
UPI Link0p Enable [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]
UPI Link1 Enable [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]
Directory Mode Enable [Enabled]
Configuration options: [Disabled] [Enabled]
SNC [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
KTI Prefetch [Enabled]
Configuration options: [Disabled] [Enabled]
Local/Remote Threshold [Auto]
Configuration options: [Disabled] [Auto] [Low] [Medium] [High]
Stale AtoS [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
LLC dead line alloc [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]
5-32
Chapter 5: BIOS Setup
Advertisement
Table of Contents
