Page 1
SERVICE MANUAL EH130 CRAWLER EXCAVATOR CONSTRUCTION CONSTRUCTION 6-75760NA...
Page 2
SERVICE MANUAL EH130 CRAWLER EXCAVATOR CONSTRUCTION CONSTRUCTION NEW HOLLAND CONSTRUCTION Form Number 6-75760NA-NH Find manuals at https://best-manuals.com...
Page 4
EH130 CRAWLER EXCAVATOR NEW HOLLAND CONSTRUCTION TABLE OF CONTENTS SECTION 1 - SPECIFICATIONS Chapter 01 Safety......................6-75760NA-NH01 Chapter 02 Specifications....................6-75760NA-NH02 Chapter 03 Attachment Dimensions ................6-75760NA-NH03 SECTION 2 - MAINTENANCE Chapter 11 Tools......................6-75760NA-NH11 Chapter 12 Standard Maintenance Time Table..............6-75760NA-NH12 Chapter 13 Maintenance Standard and Test Procedures ..........6-75760NA-NH13...
Page 5
NOTES Find manuals at https://best-manuals.com...
Page 6
CH 01 CHAPTER 1 EH130 CRAWLER EXCAVATOR NEW HOLLAND CONSTRUCTION SAFETY TABLE OF CONTENTS 1.1 GENERAL SAFETY INFORMATION ............1.1 1.2 SAFETY PRECAUTIONS................1.2 Model Cross-reference: SK135SR is NEW HOLLAND Model EH130 Find manuals at https://best-manuals.com...
SAFETY PRECAUTIONS WARNING – Indicates a potentially 1.1 GENERAL SAFETY INFORMATION hazardous situation which, if not avoided, could result in death or serious injury and is represented as follows: Do Not operate or perform any maintenance on this machine until all instructions found in the OPERATION'S MANUAL have been thoroughly read and understood.
SAFETY PRECAUTIONS Relieve all pressure in air, oil or water systems 1.2 SAFETY PRECAUTIONS before any lines, fittings or related items are The serviceman or mechanic may be disconnected or removed. Always make sure unfamiliar with many of the systems on this all raised components are blocked correctly machine.
Page 10
SAFETY PRECAUTIONS 15. Repairs which require welding should be 20. Tighten connections to the correct torque. performed only with the benefit of the Make sure that all heat shields, clamps and appropriate reference information and by guards are installed correctly to avoid p e r s o n n e l a d e q u a t e l y t r a i n e d a n d excessive heat, vibration or rubbing against knowledgeable in welding procedures.
General dimension ..................2 Weight of components...................3 Transportation dimension and weight............4 Specifications and performance ..............8 Type of crawler ....................9 Type of bucket....................10 Combinations of attachment................11 Engine specification..................12 Engine specification ..................12A 9A.2 Engine Characteristic Curve................13 Model Cross-reference: SK135SR is NEW HOLLAND Model EH130...
2.1 Arm dimensional drawing ................4 2.5 Arm maintenance standard ..............5, 6 3. BUCKET 3.1 Hoe bucket ....................7 3.2 Special bucket ....................8 4. DOZER 4.1 Dozer dimensional drawing ................12 4.2 Dozer maintenance standard ..............13 Model Cross-reference: SK135SR is NEW HOLLAND Model EH130...
Need help?
Do you have a question about the EH130 and is the answer not in the manual?
Questions and answers