Table of Contents
Advertisement
Tally Dascom DL-830
4.3 Hex-dump
If the printer fails to print online but can print the configuration list offline, you may set the printer
to operate in hex-dump mode to check the communication between the PC and the printer.
Feedback any problem to our customer support with this hex-dump list.
The procedures to set the printer operating in hex-dump mode:
Hold the ►►button when turn on the printer. Release this key after the power LED flashes
3 times and the buzzer beeps 3 time.
4.4 Auto media registration
If the media sensors are properly setup, the printer can detect and automatically register the
media to proper position.
1.
Ensure the media is loaded correctly.
2.
After turn on the printer or lock the print head, the printer automatically carries the media
registration processes.
48
User Guide V1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the DL-830 and is the answer not in the manual?
Questions and answers