Hole Punch Erase - Canon ImageCLASS 2300 Copying Manual

7
@.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
OPER SYMBOLS
0
3
8
Start

Hole Punch Erase

This mode erases the shadows that appear in copies from binding holes on
originals.
IMPORTANT
If the machine is operating in the Hole Punch Erase mode, you cannot use the Two-Page
Separation, or Different Size Originals modes.
Do not place originals with binding holes in the feeder, as this may damage the originals.
1
COPY
3-14 Frame Erase
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see "Specifying the Required
Number of Copies," on p. 2-2.
Press [Start].
Copying starts.
NOTE
If you want to cancel this mode, press
© press
F3
(YES) or
If you press (Stop) after copying has started, some blank sheets of paper may
print out.
To cancel all settings and restore the machine's standard settings, press
(Reset).
Set the frame erase width around the original using the COPY SETTINGS menu in
the Additional Functions menu. You can set from 1 mm to 20 mm. (See "Frame
Erase Width," on p. 4-8.)
Press [COPY].
lights, and the Copy Basic Features screen appears.
COPY
(Stop) © the cancel job display appears
F4
(NO).