Canon ImageCLASS 2300 Copying Manual page 69

6
F3
F4
OK
3
7
@. ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
OPER SYMBOLS
0
8
Start
3-16 Frame Erase
The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.
Press [F3] (-) or [F4] (+) to set the desired hole punch erase
width (3 mm to 20 mm) © press [OK].
You can also use the numeric keys to enter the hole punch erase width, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen returns.
NOTE
The default setting is '18 mm'.
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see "Specifying the Required
Number of Copies," on p. 2-2.
Press [Start].
Copying starts.
NOTE
If you want to cancel this mode, press
© press
F3
(YES) or
If you press (Stop) after copying has started, some blank sheets of paper may
print out.
To cancel all settings and restore the machine's standard settings, press
(Reset).
(Stop) © the cancel job display appears
F4
(NO).
C