Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Back
1 pc.
Hardware List
Hex Wrench
1 pc.
Carton 6801-CUS is also need for assembly.
home
6801-101
Arm Chair
B.
Seat
1 pc.
Small
Hex Wrench
1 pc.
styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
C.
Side
2 pcs.
M6x35
Head Cap Bolt
Spring Washer
24 pcs. (+1 extra)
24 pcs. (+1 extra)
888-680-7460
E.
Foot
4 pcs.
Flat Washer
24 pcs. (+1 extra)
Advertisement
Related Manuals for Homestyles 6801-101
Summary of Contents for Homestyles 6801-101
- Page 1 6801-101 Arm Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
- Page 2 Assembly Instructions 2/5 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/5 Head Cap Bolt STEP 3 Spring Washer Flat Washer Insert Head Cap Bolts, Spring Washers and Flat Washers into unit, tightening bolts only halfway. (See Figure 3) Figure 3 Head Cap Bolt Spring Washer Flat Washer STEP 4 Attach unit to Side (C) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
- Page 4 Assembly Instructions / 4 5 Head Cap Bolt Spring Washer Flat Washer STEP 5 Insert Head Cap Bolts, Spring Washers and Flat Washers into unit, tightening bolts only halfway. Tighten all bolts used in Steps 1, 2, 3, 4 and 5. Head Cap Bolt Spring Washer STEP 6...
- Page 5 Assembly Instructions / 5 5 Toggle Figure 5 Toggle STEP 7 Figure 6 Turn over unit to its upright position. Attach Seat Cushion (F) to unit by pushing toggles through weaving in back of unit. (See Figure 5) Place Back Cushion (G) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
- Page 6 CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.
Need help?
Do you have a question about the 6801-101 and is the answer not in the manual?
Questions and answers