Setting Up A Computer For Printing - Canon IMAGE RUNNER 5050 Network Manual

Setting Up a Computer for Printing

After you have completed the machine protocol settings, install the printer driver on
the Macintosh that will do the printing, and then make the settings for the print
destination.
Specify the following settings according to the instructions in the manual for each
driver.
IMPORTANT
You need to use optional equipment to print via an AppleTalk network. For the equipment
needed, see "Optional Equipment and System Requirements," on p. 1-2.
■ If you want to use the UFR II printer driver
1. Installation of the UFR II printer driver
6
See the Mac UFR II Driver Guide.
2. Print settings
Set the machine as the print destination.
■ If you want to use a PS printer driver provided by Apple Inc. with the Mac
OS
1. Installation of the PPD file
See the Network Quick Start Guide.
2. Print settings
Set the machine as the print destination.
3. Selection of the printer name
Select either of the following names displayed in the Macintosh screen. ('xxx' indicates
the name of the printer entered in [Service Name].)
- [xxx_D]: the print job is printed without spooling to the hard disk of the machine.
- [xxx_S]: the print job is printed after it has been spooled to the hard disk of the
6-4
Setting Up a Computer for Printing
machine.