Canon IMAGE RUNNER 5050 Network Manual page 60

3
3-14
Protocol Settings
● If you want to restrict the IPv4 addresses of computers from which
data (print/fax/I-fax job) can be sent to the machine:
❑
<Apply Settings> of [Permit IPv4 Address] for <RX/Print Range>: [On]
Press [Register] ➞ store only one IPv4 address or a range of IPv4 addresses
that are to be permitted.
❑
<Apply Settings> of [Reject IPv4 Address] for <RX/Print Range>: [On]
Press [Register] ➞ store only one IPv4 address or a range of IPv4 addresses
that are to be rejected.
● If you do not want to restrict the IPv4 addresses of computers on
which the machine setting items can be set or browsed (using the
Remote UI or utility):
❑
<Apply Settings> of [Permit IPv4 Address] for <Setting/Browsing Range>: [Off]
❑
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [Off]:
● If you want to restrict the IPv4 addresses of computers on which the
machine setting items can be set or browsed (using the Remote UI
or utility):
❑
<Apply Settings> of [Permit IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register]➞ store only one IPv4 address or a range of IPv4 addresses
that are to be permitted.
❑
<Apply Settings> of [Reject IPv4 Address] for <Setting/Browsing Range>: [On]
Press [Register] ➞ store only one IPv4 address or a range of IPv4 addresses
that are to be rejected.