Canon IMAGE RUNNER 5050 Network Manual page 176

Cause 2
Remedy
<Could not be sent.> is displayed when you try to send via a WebDAV server.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
7
Cause 4
Remedy
Cause 5
Remedy
Cause 6
Remedy
<Check the server.> is displayed when you try to send via a WebDAV server.
Cause 1
Remedy
7-14
Data Sending/File Sharing Problems and Remedies
The proxy server does not support SSL encrypted communication.
If the WebDAV client is connected to the Internet via a proxy server, set the
proxy server to use SSL.
An error occurred in the WebDAV server or proxy server.
Check the following:
•
Check the settings of the WebDAV server.
•
Check the settings of the proxy server.
External access to the target files or directories was denied.
Check the following:
•
Check the settings of the WebDAV server.
•
See the Sending and Facsimile Guide to confirm the settings for a recipient
address.
The WebDAV server is busy because of heavy access.
Try sending again later.
Sending files in chunks is not allowed.
Press [Off] for <Use Chunked Encoding with WebDAV Sending>. (See the
Sending and Facsimile Guide.)
The size of the sent data is too large.
Confirm the size of the sent data.
The specified URI (host name and folder path specified as the recipient
address) is too long.
See the Sending and Facsimile Guide to confirm the full path for the HTTP
server entered in [Host Name] and the WebDAV folder path entered in [Folder
Path] as the recipient address.
The machine tried to access the destination without using a proxy server, but it
was necessary to access via a proxy server.
Check the following:
•
Check the settings of the WebDAV server.