Viewing The Network Access Log - Canon IMAGE RUNNER 5050 Network Manual

Viewing the Network Access Log

This machine logs attempts to gain access from IP addresses that it has been set
to reject. The procedure for referring to the access log is as follows.
For instruction on how to set the machine to permit or reject specific IP addresses,
see step 17 in "TCP/IP Settings (IPv4)," on p. 3-3 or step 6 in "TCP/IP Settings
(IPv6)," on p. 3-18.
NOTE
To display [Log], set <Job Log Display> in [System Monitor Screen Restriction] in the
System Settings screen (from the Additional Functions screen) to 'On'.
1
8
8-24

Viewing the Network Access Log

Press [System Monitor] ➞ [Print] ➞ [Log] ➞ select [Network]
from the drop-down list.
The log pertaining to the rejected IP addresses is displayed.
Up to 100 logs can be displayed.
You can export the log to a CSV format file, using the Remote UI. For instructions,
see the Remote UI Guide .