PACKAGE CONTENTS
Verify that the following parts are included.
JP-4MED
The unit
JPW-BA
The unit
CONNECTIONS
Notes about handling cables
Cables and connectors are not included with the products.
*
Notes on cables (for door stations, etc.)
•
Use PE (polyethylene)-insulated PVC jacket cable.
Parallel or jacketed 2-conductor, mid-capacitance, non-shielded
cable is recommended.
•
Never use individual conductors, twisted pair cable, or coaxial cable.
Notes on CAT5e cables (for residential stations)
•
Do not bend the cables to an extent where the radius is
less than 25 mm (1"). Communication failure could result.
25mm (1") or more
Less than 25mm (1")
•
Do not remove the CAT5e cable jacket more than
necessary.
•
This unit is not a computer peripheral. Do not connect it
to a LAN network.
4
12-pin option connector
JP-8Z
The unit
CAT5e cable
CAT5e cable
4-pin option connector
•
Arrange the color code of the RJ45 connections in accordance
with EIA/TIA-568A or 568B.
Pair2
Pair4
Pair1
Pair3
1 2 3 4 5 6 7 8
T568A
•
Be sure to check the condition of cable connections with a
LAN checker before connecting with a LAN cable.
•
An RJ45 connector with a cover cannot be connected to the port
for CAT5e. Use a cable without a cover.
•
Do not pull or put excess strain on CAT5e cables.
•
Use a straight-through cable for connecting units.
Installation Manual/Operation Manual
Pair3
Pair4
Pair1
Pair2
1 2 3 4 5 6 7 8
T568B