Advertisement
TROUBLESHOOTING
Fault Code
The wire from
computer to bottom
E01
control board isn't
properly connected
E02
Short Circuit
Over Current
E05
Protection
Control Board Self-
E06
Checking
E08
EEPROM Damage
Main Reason
1.
2.
3.
1.
2.
1.
2.
3.
Change the control board
Solution
Check the connection wire between
computer and control board was well
connected.
Make sure the IC on the control board was
well inserted. If not re-insert.
Abnormal power supply in control board.
Please change a new control board.
Bad contact with motor open circuit. Please
change a new motor or check the
connector.
Power cord was puncture. Please change a
new power cord or control board.
Overloaded.
Running board with heavy resistance.
Needs to be oiled.
Damage in Motor. Replace motor.
Advertisement
