Table of Contents
Advertisement
TROUBLESHOOTING
Remote Control Pairing
If the remote control becomes unresponsive or if you have replaced the batteries, you will
need to re-pair the remote control by pressing and holding the mode button for 5 seconds.
Note:
If the remote control is not responding, the battery may be flat and will need to be
replaced.
Note:
The visible line or mark on the belt is the seam. This is not a fault and does not affect
operation of the treadmill.
Error Indicator
•
E01: Communication fault
•
E02: Voltage protection
•
E03: IPM overheating
•
E04: Low-voltage protection
•
E05: Overcurrent protection
•
E06: Motor protection
•
E08: Sensor fault
Advertisement
Table of Contents
