Table of Contents
Advertisement
ENERGY STAR
As an ENERGY STAR Partner, has followed the EPA's enhanced product
qualification and certification process to ensure that the products marked with the
ENERGY STAR logo are ENERGY STAR qualified per the applicable ENERGY
STAR guidelines for energy efficiency. The following logo appears on all ENERGY
STAR-qualified computers:
The ENERGY STAR program for computers was created by the EPA to promote
energy efficiency and reduce air pollution through more energy-efficient equipment in
homes, offices, and factories. One way that products achieve this goal is by using a
power management feature to reduce power consumption when the product is not in
use. The power management feature allows the computer to initiate a low-power or
"Sleep" mode after a period of user inactivity. When used with an external ENERGY
STAR qualified monitor, this feature also supports similar power management
features of the monitor. To take advantage of these potential energy savings, the
power management feature has been preset to behave in the following way when
the system is operating on AC power:
• Turn off the display / Initiate Sleep after <= 15 minutes (varies by model)
• Initiate Sleep after <= 30 minutes (varies by model)
The computer exits Sleep when the power/Sleep button is pressed. When the Wake
On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a
network signal.
Additional information on the potential energy and financial savings of the power
management feature can be found on the EPA ENERGY STAR Power Management
Web site at http://www.energystar.gov/powermanagement.
Additional information on the ENERGY STAR program and its environmental
benefits are available on the EPA ENERGY STAR Web site at
http://www.energystar.gov.
1. Please follow the guidance of web page:
http://www.chromium.org/chromium-os/developer-information-for-chrome-os-
devices
to put your device to Developer mode.
2. In the Chrome OS UI, please press "Ctrl + Alt + F2" or "Ctrl + Alt + →" to enter
console mode.
3. Login as "root".
4. Run "ethtool -s eth0 wol d" to disable WOL function.
Run "ethtool –s eth0 wol g" to enable WOL function.
Press "Ctrl + Alt + F1" or "Ctrl + Alt + ←" to go back to Chrome OS UI.
compliance
®
iii
Advertisement
Table of Contents
