Table of Contents
Advertisement
Wireless connections
Connecting to a wireless access point
1.
Click anywhere on the Status tray to open the tray.
2.
Click on
to automatically enable Wi-Fi function and start scanning for nearby
wireless access points. After scanning, a list of available Wi-Fi networks is
displayed on the screen.
3.
Click on the Wi-Fi network where you want to connect to.
Note: If the Wi-Fi network is protected with a password, enter the password at the
prompt.
Note: Upong successful connection, the Wi-Fi icon in the Status tray changes from
(no signal) to
Connecting to Bluetooth devices
1.
Click anywhere on the Status tray to open the tray.
2.
Click
to automatically enable Bluetooth function and start scanning for
nearby Bluetooth devices. After scanning, a list of available Bluetooth devices is
displayed on the screen.
3.
Click on the Bluetooth device you want to connect to and follow the on-screen
instructions to complete pairing.
(maximum signal strength).
12
Advertisement
Table of Contents
