AKCP ILPM Manual page 3

What is the Inline Power Meter - AC Version
The ILPM is an "in-line" AC
power
and the a power strip, or an AC
(A) and Kilowatt Hours (kWh) being consumed with billable grade accuracy. Remotely
switch devices on with an optional relay. The relay is a Bi-Stable Latched relay, which
retains its state regardless of whether it is receiving power or not.
Essential Benefits
Check how close you are to tripping your circuit breaker
Ensure sufficient power overhead before adding new equipment to a circuit
Bill individual clients in co-located services
Monitor up to 16 Inline Power Meters from a single sensorProbe+ or SEC+
The AC ILPM comes in either a 16A or 32Amp version. AC Voltage rating = 110AC to
220VAC. Please refer to the product datasheet for specific part numbers and connector
types.
Very Important note: The ILPM is ONLY compatible with the SP+ (SP2+, SPX+ &
SEC+) base units and will not work on the securityProbe or sensorProbe family of base
units. They also are not compatible with any version of the
prior to v13.0.
Rules for Safe Operation
•
To avoid possible electric shock or personal injury, and to avoid possible damage
to the ILPM sensor Meter, or to the equipment being
the following rules:-
•
Before using the ILPM,
or any portions of the power input and output connectors are damaged.
•
DO NOT connect the ILPM, or the power plugs to the AC power input source
without first cutting or disengaging the AC power that will connect to the ILPM
power input connection.
•
When connecting the AC power plugs, or direct AC lines/cables to the ILPM's
make sure you are connecting the positive
or Return Phase) and ground
•
Ensure that the sensorProbe+ or
being connected to is are
meter that is connected between the electrical source
voltage equipment, monitoring the voltage (V), current
AKCess AKCP
connected, to,
inspect the housing. Do not use the ILPM if the housing
(Line or Hot
(Protective Earth Ground)
securityProbe+ base units, and the equipment
properly grounded.
3
ILPM-AC Manual
Pro Server
please adhere to
Phase), negative (Neutral
correctly.
Formatted: Font: (Default) Arial, 12 pt
Formatted: Normal, No bullets or numbering
Formatted: Font: (Default) Arial, 12 pt