4 Test Setup and Results..........................................................................................................................................................
Introduction www.ti.com 1 Introduction The TPS51123 is a cost effective, dual-synchronous buck controller targeted for notebook system power supply solutions. It provides 5-V and 3.3-V LDOs and requires few external components. The TPS51123 supports ™ high-efficiency, fast transient response and provides a combined power-good signal. Out-of-Audio mode light- load operation enables low acoustic noise at much higher efficiency than conventional forced PWM operation.
5. When SW3 stays on, VREF (2V-REF) is enabled. 6. When SW3 stays on and turn on SW4 (ENC), CH1-output, and CH2-output start up. TPS51123 Buck Controller Evaluation Module User's Guide SLUU340A – FEBRUARY 2009 – REVISED JANUARY 2022 Submit Document Feedback...
List of Materials 7 List of Materials Table 7-1 provides a list of materials for the TPS51123-EVM. Table 7-1. TPS51123 List of Materials RERERENCE DESCRIPTION SIZE PART NUMBER DESIGNATOR C13, C23 Capacitor, Ceramic, 0.1 μF, 50 V, X5R, 10%...
0.25 inch NY HN 440 Fasteners 8 References Texas Instruments, TPS51123 Dual-Synchronous, Step-Down Controller with Out-of-Audio™ Operation and 100-mA data sheet 9 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision * (February 2009) to Revision A (January 2022) Page •...
Page 13
STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
Page 14
www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
Page 15
www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
Page 16
www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
Need help?
Do you have a question about the TPS51123 and is the answer not in the manual?
Questions and answers