Advertisement
Quick Installation Guide
E3C236D4U / E3C232D4U / E3C232D4U-V1L
6
Install the Processor
1
Open the socket levers and the
CPU socket cover. Remove the
CPU protection cap.
A
B
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
8
Install the Power Cables
Dr. Debug
10
Code
Description
00
Please check if the CPU is installed correctly and then clear CMOS.
Dr. Debug
Problem related to memory, VGA card or other devices. Please clear CMOS, re-install the memo-
0d
ry and VGA card, and remove other USB, PCI devices.
01 - 54
Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
(except 0d),
problem still exists, please install only one memory module or try using other memory modules.
5A- 60
The Memory could not be detected. Please re-install the memory and CPU. If the problem still
55
exists, please install only one memory module or try using other memory modules.
61 - 91
Chipset initialization error. Please press reset or clear CMOS.
Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other
92 - 99
slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.
Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem
A0 - A7
still exists, please clear CMOS and try removing all SATA devices.
Problem related to memory. Please re-install the CPU and memory. If the problem still exists,
b0
please install only one memory module or try using other memory modules.
b4
Problem related to USB devices. Please try removing all USB devices.
Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
b7
problem still exists, please install only one memory module or try using other memory modules.
The VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the
d6
problem still exists, please try installing the VGA card in other slots or use other VGA cards.
The Keyboard and mouse could not be recognized. Please try re-installing the keyboard and
d7
mouse.
d8
Invalid Password.
FF
Please check if the CPU is installed correctly and then clear CMOS.
2
Install the processor and close
the socket cover.
12
24
GND
1
5
+12V2
3
Close the socket levers.
9
LAN Port LED Indications
IPMI Port
Activity / Link LED
Status
ACT/LINK LED
Off
1
SPEED LED
Blinking Green
13
On
LAN Port
Speed LED
LAN Port
Status
ACT/LINK LED
Off
4
SPEED LED
8
Yellow
Green
LAN Port
11
Install the PCIE Card
1
Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2
A lig n t he ca rd connector w it h t he
slot and press firmly until the card is
completely seated on the slot.
3
Fasten the card to the chassis with the
screw.
Slot
PCIE 7
PCIE 6
PCIE 5
PCIE 4
*The M.2 slot (M2_1) is shared with the PCIE7 slot. When M2_1 is populated with a M.2 PCI Express module, PCIE7 is disabled.
PCI Express Slot Configuration
12
Install the Memory
1
Unlock a DIMM slot by
pressing the module clip
outward.
7
Install the CPU Fan and Heatsink
1
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Speed LED
Description
Status
No Link
Off
Data Activity
Off
Link
Yellow
Activity / Link LED
Description
Status
10Mbps connection or
Off
no link
100Mbps connection
Blinking Green Data Activity
1Gbps connection
On
Generation
Mechanical
Electrical
3.0
x4
x4
3.0
x16
x16
3.0
x1
x1
3.0
x8
x8
PCIE 4
Single PCIE Card
x0
Two PCIE Cards
x8
2
Insert the memory module.
www.asrockrack.com
2
Connect the CPU fan to the CPU
FAN connector.
Description
10M bps connection or no
link
100M bps connection
1Gbps connection
Description
No Link
Link
Source
PCH
CPU
PCH
CPU
PCIE6
x16
x8
3
Lock the clip.
Advertisement
