Yamaha Wolverine X2 Owner's Manual page 43

To adjust the brightness
1. Push the "SELECT" button until the
brightness level is displayed.
2. Push the "RESET" button to set the
brightness level.
3. Push the "SELECT" button to confirm the
selected brightness level and exit the
brightness control mode.
Error code display
1. Error code display
2. Engine trouble warning light "
This model is equipped with a self-diagnosis
device for various electrical circuits.
1
2
"
If a problem is detected in any of those cir-
cuits, the engine trouble warning light will
come on or flash, and the display will indicate
an error code.
If the display indicates an error code, note the
code number and have a Yamaha dealer
check the vehicle.
ECB00812
NOTICE
If the multi-function display indicates an
error code, the vehicle should be checked
as soon as possible in order to avoid en-
gine damage.
5-12
5