Yamaha Wolverine X2 Owner's Manual page 160

 If the battery will be stored for more than
two months, check it at least once a month
and fully charge it if necessary.
ECB00942
NOTICE
 Always keep the battery charged. Stor-
ing the battery in a discharged state for
an extended period of time will cause
permanent battery damage.
 Do not store the battery in an excessive-
ly cold or warm place [below freezing or
above 30 °C (90 °F)].
To install the battery
TIP
9
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first,
then the negative battery lead by install-
ing their bolt. NOTICE: When installing
the battery, the main switch must be
off, and the positive lead must be con-
nected before the negative lead.
1
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by install-
ing the bolts.
4. Install the hood.
TIP
 Make sure the battery leads are installed as
shown.
 Fully charge the battery before installing it.
9-50
[ECB01111]
2