Valve Clearance; Brakes; Checking The Front And Rear Brake Pads - Yamaha Wolverine X2 Owner's Manual

1. Tailpipe
5. Install the bolts and tighten them to the
specified torque.
Tightening torque:
Tailpipe bolt:
9
10 N·m (1.0 kgf·m, 7.4 lb·ft)
EBU32460

Valve clearance

The correct valve clearance changes with
use, resulting in improper fuel/air supply or
engine noise. To prevent this, the valve clear-
1
45°
9-38
ance must be adjusted regularly. This adjust-
ment however, should
professional Yamaha service technician.
EBU32470

Brakes

Replacement of brake components requires
professional knowledge.
should be performed by a Yamaha dealer.
EWB02572
WARNING
Operating with improperly serviced or ad-
justed brakes could lead to a loss in brak-
ing ability and an accident.
EBU32480

Checking the front and rear brake pads

Each brake pad is provided with wear indica-
tor grooves, which allow you to check the
brake pad wear without having to disassem-
ble the brake. To check the brake pad wear,
check the wear indicator grooves. If a brake
pad has worn to the point that the wear indi-
be left to a
Brake service