Engine Oil And Oil Filter - Yamaha Wolverine X2 Owner's Manual

To install
1. Insert the projections on the hood into the
slots in the front grill, and then place the
hood in the original position.
2. Turn the hood locks 1/4 turn counter-
clockwise, and then push the tab on each
hood lock down so that it is pointing rear-
ward. Make sure that the hood is securely
installed.
ECB02180
NOTICE
Do not drive the vehicle with the hood
open, unlatched, or removed.
EBU37960

Engine oil and oil filter

Check the engine oil level regularly. In addi-
tion, the oil must be changed and the filter re-
placed at the intervals specified in the
periodic maintenance chart.
ECB03020
NOTICE
 Do not use oils with a diesel specifica-
tion of "CD" or oils of a higher quality
than specified. In addition, do not use
oils labeled "ENERGY CONSERVING II"
or higher.
 Make sure that no foreign material en-
ters the oil tank.
Recommended engine oil:
See page 11-1.
Oil quantity:
Oil change only:
3.20 L (3.38 US qt, 2.82 Imp.qt)
Oil change and filter replacement:
3.30 L (3.49 US qt, 2.90 Imp.qt)
9-11
9