SpaceraiL LEVEL 1 - CLASSIC Instructions Manual page 11

C
CONNECT THE RAILS (STEPS 7-10)
Use the following illustrations and pictures as references for attaching the rails to the structure.
A
Step 7: Connect both D Rail sections to the corner of Shaft B and the back section of the Split.
Step 8: Connect both E Rail sections between the back corner of Shaft D and the back bottom corner of Shaft E.
Step 9: Connect both F Rail sections between the front corner of Shaft C and the front bottom corner of Shaft E.
Step 10: Connect both C Rail sections between the front corner of Shaft D and the middle entrance of the Elevator.
STEP 7
D
B
(D Rail)
C
STEP 9
(F Rail)
STEP 7
(D Rail)
B
D
C
STEP 9
(F Rail)
STEP 8
(E Rail)
STEP 10
(C Rail)
STEP 8
(E Rail)
STEP 10
(C Rail)
E
E
Spacerail ©2021