Prepare The Coaster Components - SpaceraiL LEVEL 1 - CLASSIC Instructions Manual

1

PREPARE THE COASTER COMPONENTS

A
ARMS
Step 1: Attach 1 Arm Holder A and
1 Arm Holder B with 1 Arm Sheath.
Insert 1 Arm into Arm Holder A.
B
LOOP & TURNS
Prepare the Loop: Find 2 Rail Clips
and attach them to both sides of
the Loop. Find the Loop Stand and
attach it to the bottom of the Loop.
C
RAIL SPLITTER
Step 2: Align Arm in Arm Holder
with the Arm Wrench. Attach as
shown in step 3.
Prepare the Turns: Find 2 Rail Clips
and attach them to both sides of
the Turn. Repeat this process with
all 6 Turns.
Prepare the Rail Splitter: Find the Rail
Splitter and 3 Rail Clips. Press the Rail Clips
on each of the Rail Splitter openings. Set
aside for coaster construction.
Step 3: Turn the Arm and Arm
Wrench counter-clockwise to lock
the arm in place.
NOTE:
Corner A and Corner B are
distinguished by the letters on the
bottoms, as shown below.
Spacerail ©2021