Selecting Input Signal - Daewoo DSP-5014LX User Manual

Selecting INPUT SIGNAL

INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
INPUT
POWER
SELECT
DISPLAY
ZOOM- ZOOM+
MENU
VOL VOL
PICTURE SCREEN
MODE MODE
FREEZE
SOUND MUTE SLEEP
MODE
46
1
Press the INPUT SELECT Button.
• Press the [INPUT SELECT] button on the Remote Control or
INPUT
the PDP Display to select [COMPONENT 1] or [COMPONENT
SELECT
2].
• Each time you press the [input select] button, a different screen
mode appears. The sequence used is as follows:
COMPONENT 1 --> COMPONENT 2 --> VIDEO 1 --> VIDEO 2
--> PC -->DVI
NOTES:
1) If an external device is not connected or INPUT signal is not
applied, Warning Message ("No Signal") would be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly done.
Component1 Component2
DVI PC
PC
Video1
Video2