Daewoo DPP-42A2(GDBD) User Manual

42” wide plasma panel

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

PLASMA DISPLAY

USER'S MANUAL

DPP-42A2(GDBD)

DPP-42A2(GJBD)

D P P - 4 2 A 2 ( G M B )

DPP-42A2(GMBD)

DPP-42A2(GWBD)

DPP-42A2(LDBD)

D P P - 4 2 A 2 ( L M B )

DPP-42A2(LMBD)

D P P - 4 2 A 2 ( L J B D )

DPP-42A2(LWBD)

Proper use guarantees

product life.

Before using the product, be advised

that you read this owner's manual well

and try to operate it.

Table of Contents

Need help?

Do you have a question about the DPP-42A2(GDBD) and is the answer not in the manual?

Questions and answers

Summary of Contents for Daewoo DPP-42A2(GDBD)

Page 1: Plasma Display
PLASMA DISPLAY USER’S MANUAL DPP-42A2(GDBD) DPP-42A2(GJBD) D P P - 4 2 A 2 ( G M B ) DPP-42A2(GMBD) DPP-42A2(GWBD) DPP-42A2(LDBD) D P P - 4 2 A 2 ( L M B ) DPP-42A2(LMBD) D P P - 4 2 A 2 ( L J B D ) DPP-42A2(LWBD) Proper use guarantees product life.
Page 2 PC, DVD player, and so on over a single cable. • MGDI Plus (Meta Genuine Digital Image) Engine MGDI Plus is the image enhancement technology designed by Daewoo Electronics, which provides more clear, realistic, and delicate images.
Page 3: Safety Precautions
Safety Precautions Power Always obey all During a lightning storm, or when it is left When unplugging your TV, always grip unattended and unused for a long period the plug ﬁrmly and pull straight out from safety messages. of time, unplug it from the wall outlet. the socket.
Page 4: During Use
During Use Do not open the cover (or back) Never push any kind of objects into because high voltage is present this product through openings at the within the TV enclosure. back of TV. It may cause electric shock. It may cause ﬁre or electric shock. The apparatus shall not be exposed to Do not allow children to play or hang Do not place a candle or lighted...
Page 5 Safety Precautions Power Always obey all When moving your TV, remove the power Do not touch the power plug with wet plug, antenna, and cables, and be sure to hands when plugging or unplugging it safety messages. move it by using two people.. into the wall socket.
Page 6 During Use Do not wipe the TV using a cloth Do not place heavy objects or heat damped with chemicals (benzene, sources on the power cord. thinners, etc.). The TV appearance may be marred. It may damage the power cord, causing ﬁre (Unplug the power plug and wipe with soft or electric shock.
Page 7: Checking Accessories
Scart to RCA Jack (Option) 1 UNIT AC Cable 1 UNIT Note The following items are optional accessories. Optional Accessories Refer purchasing optional accessories from Daewoo Electronics Local Retailers or the retailer from where you purchased the unit. Wall Mounting Unit Stand Unit...
Page 8 How to install Cable Holder Cable Holder Installing Position The method of wire arrangement 1 Assemble the cable holder enclosed on the back of TV. (PICTURE 1) (ASSEMBLY METHOD: After you push the "A"(prominence part of cable holder) in the hole, rotate the cable holder clockwise as an angle of 90°.
Page 9 How to use Scart to RCA Jack Scart to RCA Jack is provided with the speciﬁc models for changing Scart signal to RCA signal or RCA signal to Scart signal. Scart to RCA Jack has a 'INPUT / OUTPUT' selecting switch. While Scart to RCA Jack is connected to AV1, you can select 'INPUT' or 'OUTPUT' with the switch.
Page 10: Table Of Contents
CONTENTS PREPARATION 4 • Safety Precautions 8 • Checking Accessories 12 • Panel Controls 14 • Remote Control CONNECTION 16 • Antenna Connection 18 • To Watch TV 20 • Install Program 26 • Watching Digital Broadcasts 28 • Watching Cable Broadcasts 30 •...
Page 11: Panel Controls
Panel Controls Front Panel, Rear Panel Items having the same name on the plasma display and the remote control would function in exactly the same way. Front / Side STAND-BY/OPERATE ON/OFF MENU Select when adjusting volume or Power Standby: select/adjust Red - Standby “MENU.”...
Page 12 Rear INPUT COMPONENT HDMI PC AUDIO SERVICE DIGITAL AUDIO OPTICAL PC AUDIO INPUT PC INPUT (15 pin D-sub) HDMI INPUT COMPONENT A/V jacks SCART, A/V INPUT/OUTPUT.
Page 13: Remote Control
Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the The number in ( ) indicates the page in which same type as the original ones. the function of each button is explained in detail. •...
Page 14: When Using Remote Control
RECALL button Indicates the current state and resolution. Screen Size button STILL button Adjusts the size of the screen. Press this button to freeze the picture. Sleep button Each time you press this button, a EDIT button different input mode appears. The sequence is as follows: 15Min.
Page 15: Antenna Connection
Antenna Connection CTV Antenna Connection TV antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and ﬁx it ﬁrmly. ANT/CABLE Coaxial cable When a feeder cable is used ANT/CABLE...
Page 16 Outdoor Antenna Connection Outdoor antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE Separate Antenna Connection. VHF-Antenna In case of coaxial cable In case of feeder cable ANT/CABLE UHF-Antenna Antenna combining adapter...
Page 17: To Watch Tv
To Watch TV To Watch TV - The buttons on the keypad in the PDP unit, which have the same name as those on the remote control, perform the same function as the remote control. Press the “POWER” button of the PDP unit. •The “...
Page 18 Press the “POWER” button. • Connect the AC power cord to PDP unit. • The LED of the PDP unit turns red colour when power cord connect AC power. • Press the “+PR- ” or “POWER” button of the remote control or keypad of the PDP unit.
Page 19: Install Program
Install Program Auto Setup - This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply ﬁnd programs with “+PR- ” buttons and so need not select programs by pressing each program number. - Up to 100 TV stations can be stored in this set by programme numbers (0 to 99).
Page 20 Select the “Auto Setup”. • Select the “Auto Setup” with the “°Â°„ ” button. Auto Setup • Then press the “¢∏ ¢ ∫ ” button. Edit Picture Manual Setup Sound Screen Feature Install Move Select Exit MENU Select the “Country”. •...
Page 21: Edit Menu
Edit EDIT MENU. • EDIT menu appears as on the right if the Auto search is completed, or press the “EDIT” button on the remote control in order to see EDIT menu. Edit BBC1 ----- ----- ----- ----- ----- ----- ----- ----- -----...
Page 22: Manual Setup
Manual Setup Press the Number Buttons(0~9) or the “ ” Button to Select a Program Number You Want. Manual Setup Program Picture Channel Sound Fine Tune Name Screen Video Audio Feature Search Memory Install Move Adjust Exit MENU Adjust 0 ~ 9 Find the Desired Channel.
Page 23 Manual Setup Name the program • Using “¢∏ ¢ ∫ ” button, move the position where you want to write the character. • Select the desired character with the “PR” button. • There are A-Z, +, ., /, and 0-9 characters. •...
Page 24 Find the Desired Channel with 'Search'. • By selecting the Search function, you can ﬁnd the desired channel, but it searches only one channel unlike Auto Setup. • If the nearest channel is found, the searching would be stopped automatically. Manual Setup Program Picture...
Page 25: Watching Digital Broadcasts
Watching Digital Broadcasts Connect a Digital Broadcasting Receiver to the Watching Digital • Prepare A/V cables. Broadcasts • Connect the cables from the digital TV Receiver output terminal to the PDP(Component ) input terminal. • To watch digital • When connecting the cables, be sure to match the cable colours. broadcasts: - Purchase a separate Digital Broadcasting...
Page 26: Input Select
Input Select • Select [Component] by pressing the "MULTIMEDIA" button of the remote control or using the “INPUT SELECT” button of the PDP unit. • Each time you press the “MULTIMEDIA” button, different input modes appear. The sequence is as follows: Component HDMI Select the Desired Channel and Function...
Page 27: Watching Cable Broadcasts
Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • To watch cable broadcasts, subscribe to your local cable TV broadcasting, and then connect a cable Broadcasting...
Page 28 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [AV] button of the remote control or the "INPUT SELECT" in keypad of the PDP unit. • Each time you press the [AV] button, different input modes appear. The sequence is as follows: AV(S)3 Select the Desired Program and Function...
Page 29: Watching Satellite Broadcasts
Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to the PDP. Watching Satellite • Prepare the A/V cable. Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. •...
Page 30 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [AV] button of the remote control or the "INPUT SELECT" in keypad of the PDP unit. • Each time you press the [AV] button, different input modes appear. The sequence is as follows: AV(S)3 Select the Desired Program and Function...
Page 31: Watching A Dvd Image
Watching a DVD Image Connect a DVD Player to the PDP. Watching a DVD • Prepare the AV cable. Image • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. •...
Page 32 Input Select • Select [Component, AV1(Scart), AV2(Scart) or AV3(S-Video)] by pressing the [MULTIMEDIA] or [AV] button of the remote control or the "INPUT SELECT" in keypad of the PDP unit. • Each time you press the [MULTIMEDIA] or [AV] button, a different input mode appears. The sequence is as follows: •...
Page 33: Watching A Vcr Image
Watching a VCR Image Connect a VCR to the PDP. Watching a • Prepare the AV cable. VCR Image • Connect the Video(Output) to PDP(Video Input) as shown below. • Video can use either the video terminal or the S-video terminal. INPUT COMPONENT HDMI...
Page 34 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV 3(S-Video)] by pressing the [AV] button of the remote control or the "INPUT SELECT" in keypad of the PDP unit. • Each time you press the [AV] button, different input modes appear. The sequence is as follows: AV(S)3 Select the Desired Title and Function...
Page 35: Watching A Camcorder/Game Console Image
Watching a Camcorder/Game Console Image Connect a Camcorder/Game Console to the PDP. Watching a Camcorder/Game • Prepare the AV cable. Console Image • Connect the Video(Output) to the PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. •...
Page 36 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV 3] by pressing the [AV] button of the Remote Control or the "INPUT SELECT" in keypad of the PDP unit. • Each time you press the [AV] button, different input modes appear. The sequence is as follows: AV(S)3 Select Function...
Page 37: Connecting Pc(15Pin D-Sub
Connecting PC(15pin D-sub) Before Connecting to the PDP, Set the Resolution of the PC. Connecting PC • Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLAY menu. • This product •...
Page 38 Press the Power Buttons. • Turn on the PDP and the PC. Input Select • Select [PC] by pressing the [MULIMEDIA] button of the remote control or PDP unit. • Each time you press the [MULIMEDIA] button, a different input mode appears. The sequence is as follows: COMPONENT HDMI...
Page 39: Connecting Hdmi
Connecting HDMI Connect the HDMI to the PDP. Connecting HDMI • Prepare the HDMI cable. • Connect the HDMI(Output) to the PDP(Input) as • This product supports shown below. resolution of VGA, SVGA, XGA, SXGA, UXGA. • Before connecting a PC to the PDP, be sure to adjust the resolution of PC.
Page 40 Press the Power Buttons. • Turn on the PDP and DVD or Game console. Input Select • Select [HDMI] by pressing the [MULTIMEDIA] button of the remote control or the Input button on the PDP unit. • Each time you press the [MULTIMEDIA] button, a different input mode appears.
Page 41: Connect With The Dolby Digital Amp
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound. Optical output Dolby Digital AMP Woofer Center Surround L Surround R...
Page 42 PC and HDMI Input Resolution Available in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark HDMI 31.469...
Page 43: Selecting Picture Mode
Selecting Picture Mode Selecting Picture Mode Selecting Picture • Press the [P.MODE] on the remote control. Mode • While pressing the [P.MODE] for the ﬁrst time, the current picture mode will be • Select the Picture mode displayed. that is appropriate depending on the kinds of pictures, you enjoy.
Page 44: Customising Picture
Customising Picture Press the MENU Button. Customising • The MENU shown below will display on the screen. Picture Mode Normal • You can adjust the Brightness Picture colour tone and Contrast brightness to your Sound Sharpness preference. Colour Screen Colour Temp. Normal N.R.
Page 45: Picture Condition Adjustments
Select User Mode Adjustments • While you are in [Picture Mode – User], press the buttons to select a speciﬁc adjustment item. “ ” Mode User Brightness Picture Contrast Sound Sharpness Colour Screen Colour Temp. Normal N.R. Feature Install Move Adjust Exit MENU...
Page 46 Press the “COLOUR TEMP” button on the remote control. • Pressing the “COLOUR TEMP” button ﬁrst time will display the current setting for COLOUR TEMP. • Each time you press the button, a different colour temp appears. The sequence used is as follows : Normal Dynamic Cinema...
Page 47: Adjusting Screen
Adjusting Screen Press the SCREEN SIZE Button. Adjusting with Screen Size button • The current screen size will be displayed on the screen. • Each time you press the SCREEN SIZE button on the • You can adjust remote control, a different screen size appears. The screen size or sequence used is as follows in case of AV and TV modes : aspect ratio as...
Page 48 Adjusting Screen in the MENU Press the MENU Button. Adjusting Screen • The MENU screen as shown below will appear. Mode Normal • You can adjust the Brightness Picture screen in the menu. Contrast Sound Sharpness Colour Screen Colour Temp. Normal N.R.
Page 49: Screen Mode
Adjusting Screen in the MENU Screen Mode Function This function is same to the [Screen Size] of Press the Volume “ ” Buttons. remote controller. • Press the Volume “ ” buttons to enter the sub menu “Screen”. • While you are in ‘Screen’ menu, press the “ ”...
Page 50: Watching A Still Image
Watching a STILL Image Press the “STILL” Button. Watching a • If you wish to freeze a picture, press the “STILL” button. Still Image You can still hear the sound. • Press “STILL” button again to cancel the “STILL” function. •...
Page 51: Watching Two Pictures Simultaneously
Watching Two Pictures Simultaneously • PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously. Engaging PIP mode Screen Adjustment • Press the ‘PIP’ button once on the remote control to engage of the Sub-picture the Picture-in-Picture mode. •...
Page 52: Watching Two Pictures Simultaneously
Watching Two Pictures Simultaneously Select the program • Using program Up/Down buttons , you may select the desired channels for sub-pictures. • The PR Up/Down buttons select the TV channels. Select the Input Source • Various signal sources can be displayed within the sub-picture under PIP mode.
Page 53: Selecting Sound Mode
Selecting Sound Mode Select “SOUND MODE”. Selecting • Press the “S.MODE” on the remote Sound Mode control. • While pressing the “S.MODE” for the • Enjoy various sound ﬁrst time, the current sound mode will modes by selecting be displayed. your favourite Sound Mode depending on the kinds of moving...
Page 54: Customising Sound Mode
Customising Sound Mode Press the MENU Button. Customising • The MENU screen as below will be displayed. Sound Mode Mode Normal • This feature allows Brightness Picture the user to adjust for Contrast their preference. Sound Sharpness Colour Screen Colour Temp. Normal N.R.
Page 55: Language Selection
Language selection for dual language Select the Effect Mode. broadcast • Select [Effect] by pressing the buttons, “ ” • If a programme is then select the desire sound effect by pressing received in two the “ ” button. languages (dual •...
Page 56 Customising Sound Mode Select the Sound Mode. • Select the Sound Mode by pressing the buttons, then “ ” adjust it by pressing the “ ” buttons. Balance Effect Picture Mode Normal Sound Equalizer Screen Feature Install Move Adjust Exit MENU Normal Movie...
Page 57: Selecting Input Signal
Selecting INPUT SIGNAL Press the Input Signal Selecting Button. INPUT SIGNAL • Press the “TV”, “AV” or “MULTIMEDIA” button on the remote control, or select the desire input signal using • Used to select INPUT signal of Keypad of the PDP unit. external device •...
Page 58: Checking The Current Input Signal
Checking the Current Input Signal - Press the [RECALL] button on the remote control, then displays basic informations of the current input signal, Under this state, pressing the [RECALL] button once more, additional informations about the current input signal will be displayed on the OSD. Checking the Current Input Signal Press the RECALL Button.
Page 59 MENU Background, Language and Child Lock Setting Press the MENU Button. Selecting • The MENU screen will be displayed as below. Languages Normal Mode • Used to select the Brightness Picture translucent level of Contrast MENU background Sound Sharpness Colour and language used Screen Colour Temp.
Page 60 MENU Background, Language and Child Lock Setting “ ” Select LANGUAGE by using the Button. • Select [Language] by using the button. “ ” • Every press of the “ ” button while you are in the [Language] mode would cycle through the different languages.
Page 61: Mgdi Plus (Meta Genuine Digital Image)
MGDI Plus (Meta Genuine Digital Image) MGDI Plus is the image enhancement technology of Daewoo Electronics, which provides more clear, realistic, and delicate images. Press the MENU Button. MGDI Plus • The MENU screen will be displayed as below. Mode...
Page 62 Press the MGDI button on the remote control. • Pressing the “MGDI” button ﬁrst time will display the current setting for MGDI Plus. • To cancel the MGDI Plus, press the “MGDI” button to select ‘Off’. Background Language English Picture Child Lock MGDI Plus Sound...
Page 63: Auto Power Setting
Auto Power Setting Auto Power Setting POWER/STANDBY button • Select the [Auto Power] by pressing the “ ” Indicator from [Feature]. • You can select [Auto Power] ON and OFF mode by using Front panel LED lights the “ ” button. •...
Page 64: Time Setting
Time Setting Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture Contrast Sound Sharpness Colour Screen Colour Temp. Normal N.R. Feature Install Move Select Exit MENU Select Feature • Select [Feature] by the button.
Page 65 Time Setting Off-Time and Wake time setting Time Setting • Select Functions by pressing the “ ” button. First, set [Clock]- current time, and then You can • The “Current time” setup off-time and wake time. must be set up ahead •...
Page 66: Image Sticking Minimisation(Ism)
Image Sticking Minimisation(ISM) Press the MENU Button. • The MENU screen will be displayed as below. Mode Normal Brightness Picture Contrast • Image sticking Minimisation Sound Sharpness • Displaying a still image for a Colour long time causes part image Screen Colour Temp.
Page 67 Image Sticking Minimisation(ISM) Select Functions. • Every press of the “ ” button after select function by the button would switch between ON/OFF. “ ” Pixel Shift Picture Low Bright Image Invert Sound Screen Feature Install Move Adjust Exit MENU NOTES: Pixel Shift : The whole screen shifts up/down, left/right at 15 sec interval to...
Page 68: Initialize Setting
Initialize Setting Press the MENU Button. Back to Initialization • The MENU screen will be displayed as below. Mode Normal • You can restore the Brightness Picture values of the adjustment Contrast setting made in the Sound Sharpness MENU back to factory Colour Screen settings.
Page 69 Initialize Setting INITIALIZATION • Enter the sub Menu by using the “ ” button. • Select the [Initialize] by pressing the “ ” button, then press the “ ” button. • A conﬁrmation message will be displayed. • To perform initialization, press the “ ” button after selecting [YES] by the “...
Page 70: Setting Sleep Timer
Setting Sleep Timer Press the “SLEEP” Button. Setting • Press the “SLEEP” button on the Remote Control. • Pressing the “SLEEP” button ﬁrst time will display the Sleep Timer current setting for Sleep Timer. • To cancel the Sleep Timer, press the “SLEEP” button to •...
Page 71 Teletext Switching Teletext ON/OFF • Press the Text button ( ) The index page or the page viewed last will appear. Press the Text button again to return to the TV mode. Colour buttons in TOP/FLOF Teletext • A red, green, yellow and cyan ﬁeld is shown at the bottom of the screen.
Page 72 Calling Up Subpage Directly • Pressing the Subpage( ) button. The subpage number is displayed at the bottom of the screen. To change the subpage, press the subpage number, for example, the 2nd page, sequence 02. The desired subpage will eventually be displayed on the screen and holds it there.
Page 73: Before Requesting Service
Before Requesting Service Before requesting for service, check the following points once again. • Remote control does not • The Display makes a snapping • There are empty spots at the top function properly. sound. and the bottom area of the screen. •...
Page 74: Speciﬁcations
SPECIFICATIONS DISPLAY UNIT Diagonal Size 106cm (42 ) Screen Aspect Ratio 16 : 9 System PAL B/G, I/I, SECAM B/G, D/K, L/L’ Display Resolution SD Panel : 852(H) 480(V) dots HD Panel : 1024(H) 768(V) dots Pixel Pitch SD Panel : 1.08(H) 1.08(V) mm HD Panel : 0.90(H) 0.676(V) mm...
Page 75 48586900E10U-R0...

This manual is also suitable for:

Dpp-42a2(gjbd)Dpp-42a2(ldbd)Dpp-42a2(lmb)Dpp-42a2(lmbd)Dpp-42a2(gmb)Dpp-42a2(ljbd) ... Show all

Daewoo DPP-42A2(GDBD) User Manual

Quick Links

PLASMA DISPLAY

Need help?

Questions and answers

Related Manuals for Daewoo DPP-42A2(GDBD)

Summary of Contents for Daewoo DPP-42A2(GDBD)

This manual is also suitable for:

Table of Contents