Checking The Current Input Signal - Daewoo DSP-5014LX User Manual

Checking the Current Input Signal

Checking the
Current Input Signal
• Used to check the
INPUT signal mode,
resolution,
frequency, etc. of the
current screen.
INPUT
POWER
SELECT
DISPLAY
ZOOM- ZOOM+
MENU
VOL VOL
PICTURE SCREEN
MODE MODE
FREEZE
SOUND MUTE SLEEP
MODE
48
1
Press the DISPLAY Button.
• Press the [DISPLAY] button on the Remote Control.
DISPLAY
1. If you watch Digital Broadcasts:
Component 1
1920 x 1080
60 Hz
2. If you watch DVD image:
Component 2
YUV 60 Hz
3. If you watch VCR image:
Video 1
NTSC 60 Hz
NOTES:
1) DAEWOO PLASMA can receive NTSC, PAL, SECAM, etc.
2) "1920 x 1080" displayed in the INPUT signal does not indicate
the resolution of the monitor, but the signal that is sent by
Digital Broadcasting Receiver.
Component 1
1920 x 1080
Displays which input terminal is used, and indicates the input signal mode.
Indicates the horizontal and vertical resolution of the current INPUT signal.
Indicates the frequency of the current INPUT signal.
Displays which input terminal is used, and indicates the signal mode.
Indicates the mode and frequency of the current INPUT signal.
Displays which input terminal is used, and indicates the signal mode.
Indicates the mode and frequency of the current INPUT signal.
60 Hz